What do you store your hard drives in? Here’s some great 3.5-Inch SATA/ IDE Hard Drive Protection

drive in caseLooking for a way to protect your backup drives (especially if you use a drop-in dock like I do) then consider these handy little cases, which protect the drive from static, dust, spiders, etc.

I personally like to get a 1 TB drive per client/project and then, when that project is done, or awaiting approval, I pull it out of the dock and put it on the shelf to work on other projects.  The advantage of putting the drive in a case, aside from the protection, is that I  can put some very big labels with lots of notes about what’s on the drive, which is usually a lot of stuff.

Advertisements

5 thoughts on “What do you store your hard drives in? Here’s some great 3.5-Inch SATA/ IDE Hard Drive Protection

Add yours

  1. WHOA Anthony – just yesterday I had given up finding EXACTLY these cases. I’ve been searching for aaaaaages; months and months for something to put our project-specific HDD’s.

    Puhleeese advise where these can be bought – or at least seen!!!
    I cannot find them anywhere.

    Regards – Howard

    1. Forgive the delay – was on a big film job. Duh! What a Roger Ramjet I am – didn’t even think to click the picture. Thanks for response 8-) (Would you believe I also run 2 blogs and do EXACTLY the same for links … ) Regards – Howard

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Blog at WordPress.com.

Up ↑